ACTi I91 - Manual (Page 33)

www.acti.com
Hardware Manual
33
2b. If the cable will go along the wall , remo v e the pre-cut tab on the L-type wall
mount using pliers. Then route the cable through the cable holes (A to B) as marked
below.
With the cable(s) dangling, attach three (3) screws (included in the camera package) to
install the L-type wall mount onto the wall.
Step 2: Install the Camera
1. Connect the network cable to the Ethernet port of the camera. If necessary, connect the
other cables (such as power adapter, DI/DO, etc.) to the corresponding connectors.
B
A