Waterproof solution with conduit, Waterproof solution, With conduit – ACTi KCM-7911 User Manual
Page 18: Hardware manual
Hardware Manual
Waterproof Solution with Conduit
This section describes the procedures to waterproof the cabling connections using a flexible
conduit with 3/8” trade size (not supplied). This is the recommended solution when connecting
an external power adaptor, audio in/out, or digital input/output (DI/DO) devices to the camera.
1.
Disassemble the cable gland as shown below:
2.
Pull the Ethernet cable and other cables (if any) through the flex conduit.
NOTE:
To connect an external power adaptor, audio in/out, or digital input/output (DI/DO)
devices, insert the cables without connectors through the flex conduit together with the
Ethernet cable at this point.
3.
Insert the clamping nut through the flex conduit.
Lock
Nut
Body
(with Washer)
Sealing
Rubber
Clamping
Nut
- Outdoor Hemispheric / Fisheye Dome on Straight Wall Outdoor Hemispheric / Fisheye Dome on Hard Ceiling Outdoor Hemispheric / Fisheye Dome on Vertical Pole with Tilted Mount (PMAX-0310) Outdoor Hemispheric / Fisheye Dome on Corner with Tilted Mount (PMAX-0310) Outdoor Hemispheric / Fisheye Dome on Dropped Ceiling Outdoor Hemispheric / Fisheye Dome on Tilted Wall