Hardware manual – ACTi KCM-7911 User Manual
Page 20
Hardware Manual
7.
Insert the Ethernet cable and other cables (if any) through the conduit gland body.
Ethernet Cable Only
Ethernet and External Power Adaptor Cable
8.
Connect the Ethernet cable to the Ethernet port of the camera. If connecting other cables,
such as an external power adaptor, audio in/out or DI/DO devices, connect the terminal
blocks at this point and connect them to the corresponding connectors of the camera (see
on page 21 for more information).
9.
Insert the sealing rubber into the conduit gland body and attach the clamping nut to
complete the cable solution.
NOTE:
Make sure the clamping nut is tightly attached to the conduit gland body.
or
or
12V Power Connector
Digital Input / Output
(DI/DO) Connector
Audio Input / Output
Connector