Allmand Brothers MAXI LITE II User Manual

Page 29

Advertising
background image

3-4

USING THE LIGHT TOWER

To level and stabilize the trailer:

1 Position the Maxi-Lite II on a suitable site. See “

WORK

SITE CONSIDERATIONS

” on page

3-2.

2 Block both sides of each wheel with wheel chocks.

3 Extend the outriggers and lock them into place.

4 Pull out the jack lock pin, then rotate the stabilizer

jacks into position (perpendicular to the ground).
Release the lock pin to lock them into place.

5 Adjust each stabilizer jack and the tongue jack to

achieve proper leveling. Turning the handles
clockwise will raise the jacks and counterclockwise
will lower the jacks.

WARNING

ROLLOVER HAZARD

All stabilizer jacks must be in firm contact with a flat,

level, solid ground surface.

Outrigger
lock pin

Jack lock pin

Jack handle

Outrigger

Front outrigger
and jack

Outrigger
lock pin

Jack lock pin

Jack handle

Outrigger

Rear outrigger
and jack

Jack handle

Safety chains

Safety decal

Tie down loop

Ball hitch
coupler

Lunette ring

Advertising
This manual is related to the following products: