Allmand Brothers MAXI LITE II - Manual (Page 5)

1-2
INTRODUCTION and OVERVIEW
Congratulations on your purchase of a new Allmand
Maxi-Lite II light tower. Welcome to the Allmand
Family of equipment owners.
The Allmand Maxi-Lite II light tower offers many
advantages to make operation safer, more convenient
and more cost effective. It will give you high quality
performance and durability for more productivity on
the job site for many years.
ABOUT THIS MANUAL
This Operator’s Manual provides you with the
information necessary to safely and efficiently operate
your Maxi-Lite II light tower.
Before you operate this machine, read this manual
completely and carefully so that you understand the
safety instructions and the operation of controls and
safety equipment. You must comply with all Danger,
Warning, and Caution notices. They are for your
benefit.
Specific operating instructions and specifications are
included to familiarize you (the operator) and the
maintenance personnel with the correct and safe
procedures necessary to operate and maintain this
equipment in a safe and efficient manner.
Keep this manual in the manual storage canister on the
machine.
If you are uncertain about any of the information in this
manual, contact the Allmand Service Department at
1-800-562-1373, prior to operating the equipment.
Left Side/Right Side Orientation
Any reference in this manual to left side or right side
shall be determined when viewing the machine from
the rear. The front of the machine is that end having the
light tower attached to it when the light tower is in the
vertical position.
Replacement Parts
For easy reference when ordering replacement parts or
making service inquiries regarding this machine, record
the model number and serial number of this machine,
and the engine and generator models and serial
numbers, in the “Important Information” area on the
inside of the front cover. The serial number for this
machine is stamped on the serial number plate located
on the lower right rear of the trailer.
For replacement parts, contact the Allmand Parts
Department at 1-800-562-1373.
Replacement of any part on this machine by anything
other than an Allmand authorized replacement part
may adversely affect the performance, durability, or
safety of this machine.
Disclaimer
Allmand Bros., Inc. reserves the right to make changes
on, and add improvements to, its products at any time,
without public notice or obligation. Allmand also
reserves the right to discontinue manufacturing any
product at its discretion, at any time.
The information found in this manual was in effect at
the time it was printed. Allmand Bros. may change the
contents of this manual at any time, without notice or
incurring obligation.