Allmand Brothers MAXI LITE II - Manual (Page 36)

MAXI-LITE II 3-11
TURNING ON THE LIGHTS
The tower light control panel contains the breaker
switches that control the trailer lights (one switch per
light).
The four light fixtures are controlled and protected by
four breaker switches located on the light control panel.
for additional information, see “
Maxi-Lite II light and
engine control panel (default) ” and “ Maxi-Lite II light
and Kubota engine control panel (default) ” on page 1-8.
The switches work just like a regular circuit breaker in
your home. Normal settings are ON and OFF. If a
breaker trips, it is in the "center" position, and you have
to turn it all the way OFF and then back ON again.
BALANCING THE LOAD
It’s important that the load on the generator be
balanced.
To turn the lights on:
• Turn one or more light breaker switches to the ON
position.
To turn the lights off:
• Turn all light breaker switches to the OFF position.
SHUTDOWN PROCEDURE
To shut down for a short period of time:
1 With the lights off, lower the light tower to the full
down position.
2 Turn the engine off.
To shut down for a long period, or to prepare for
trailering:
• When shutting down the light tower for long
periods of time or when preparing to trailer, refer to
“
PREPARING FOR TRAILERING - SHUTDOWN ” on
page 4-3 .
NOTICE
Before turning the lights on, the engine must be
running and should be allowed to reach normal
operating temperature.