Amer Networks E5 CLI - Manual (Page 39)

cfglog
2.2.14. connections
List current state-tracked connections.
Description
List current state-tracked connections.
Usage
connections -show [-num=<n>] [-verbose] [-srciface=<interface>]
[-destiface=<interface>] [-protocol=<name/num>]
[-srcport=<port>] [-destport=<port>] [-srcip=<ip addr>]
[-destip=<ip addr>] [-ipver={IPV6 | IPV4}]
List connections.
connections
Same as "connections -show".
connections -close [-all] [-ipver={IPV6 | IPV4}]
[-srciface=<interface>] [-destiface=<interface>]
[-protocol=<name/num>] [-srcport=<port>]
[-destport=<port>] [-srcip=<ip addr>]
[-destip=<ip addr>]
Close connections.
Options
-all Mark all connections.
-close Close all connections that match the filter
expression. (Admin only)
-destiface=<interface> Filter on destination interface.
-destip=<ip addr> Filter on destination IP address.
-destport=<port> Show only given destination TCP/UDP port.
-ipver={IPV6 | IPV4} List only connections of the specified IP version.
-num=<n> Limit list to <n> connections. (Default: 20)
-protocol=<name/num> Show only given IP protocol.
-show Show connections.
-srciface=<interface> Filter on source interface.
-srcip=<ip addr> Filter on source IP address.
-srcport=<port> Show only given source TCP/UDP port.
Chapter 2: Command Reference
39