Access – Amer Networks E5 CLI User Manual
Page 94
• SSLVPNInterfaceSettings, page 268
• ST201EthernetPCIDriver, page 269
• StateSettings, page 270
• TCPSettings, page 271
• ThresholdRule, page 273
• TulipEthernetPCIDriver, page 275
• UpdateCenter, page 276
• URLFilterPolicy, page 277
• UserAuthRule, page 278
• VLAN, page 281
• VLANSettings, page 283
• WebContentFilteringPolicy, page 284
• X3C905EthernetPCIDriver, page 285
3.1. Access
Description
Use an access rule to allow or block specific source IP addresses on a specific interface.
Properties
Index
The index of the object, starting at 1. (Identifier)
Name
Specifies a symbolic name for the object.
Action
Accept, Expect or Drop. (Default: Drop)
Interface
The interface the packet must arrive on for this rule
to be carried out. Exception: the Expect rule.
Network
The IP span that the sender must belong to for this
rule to be carried out.
LogEnabled
Enable logging. (Default: Yes)
LogSeverity
Specifies with what severity log events will be sent
to the specified log receivers. (Default: Default)
Comments
Text describing the current object. (Optional)
Note
If no
Index
is specified when creating an instance of this type, the object will be placed
last in the list and the
Index
will be equal to the length of the list.
Chapter 3: Configuration Reference
94