Amer Networks E5 CLI User Manual
Page 62
Show interface information.
ospf -area [<OSPF Area>] [-process=<OSPF Router Process>]
Show area information.
ospf -neighbor [<OSPF Neighbor>] [-process=<OSPF Router Process>]
Show neighbor information.
ospf -route [{HA | ALT}] [-process=<OSPF Router Process>]
Show the internal OSPF process routingtable.
ospf -database [-verbose] [-process=<OSPF Router Process>]
Show the LSA database.
ospf -lsa <lsaID> [-process=<OSPF Router Process>]
Show details for a specified LSA.
ospf -snoop={ON | OFF} [-process=<OSPF Router Process>]
Show troubleshooting messages on the console.
ospf -ifacedown <interface> [-process=<OSPF Router Process>]
Take specified interface offline.
ospf -ifaceup <interface> [-process=<OSPF Router Process>]
Take specified interface online.
ospf -execute={STOP | START | RESTART}
[-process=<OSPF Router Process>]
Start/stop/restart OSPF process.
Options
-area
Show area information.
-database
Show the LSA database.
-execute={STOP | START | RESTART}
Start/stop/restart OSPF process. (Admin only)
-iface
Show interface information.
-ifacedown
Take specified interface offline. (Admin only)
-ifaceup
Take specified interface online. (Admin only)
-lsa
Show details for a specified LSA <lsaID>.
-neighbor
Show neighbor information.
-process=<OSPF Router Process>
Required if there are >1 OSPF router processes.
-route
Show the internal OSPF process routingtable.
-snoop={ON | OFF}
Show troubleshooting messages on the console.
Chapter 2: Command Reference
62