Amer Networks E5 CLI - Manual (Page 60)

-hashinfo Show information on hash table health.
-hw=<pattern> Show only hardware addresses matching pattern.
-ip=<pattern> Show only IP addresses matching pattern.
-num=<n> Show only the first <n> entries per interface.
(Default: 20)
-query=<ip> Send Neighbor Solicitation for <ip>.
-show Show Neighbor Discovery entries for given
interface(s).
<Interface> Interface name.
2.2.52. ndsnoop
Toggle snooping and displaying of ARP requests.
Description
Toggle snooping and displaying of Neighbor Discovery queries and responses on-screen.
The snooped messages are displayed before the access section validates the sender IP addresses
in the ARP data.
Usage
ndsnoop
Show snooped interfaces.
ndsnoop {ALL | NONE | <interface>} [-verbose]
Snoop specified interface.
Options
-verbose Verbose.
{ALL | NONE | <interface>} Interface name.
2.2.53. netcon
List all NetCon users.
Description
Show a list of connected NetCon users.
Chapter 2: Command Reference
60