Amer Networks E5 CLI - Manual (Page 72)

Usage
selftest -memory [-num=<Integer>]
Check the sanity of the RAM.
selftest -media [-size=<Integer>]
Check the sanity of the disk drive.
selftest -mac
Check if there are MAC address collisions on the interfaces.
selftest -ping [-interfaces=<Interface>]
Run a ping test over the interfaces.
selftest -throughput [-interfaces=<Interface>]
Run a throughput test over the interfaces.
selftest -traffic [-interfaces=<Interface>]
Run a traffic test over the interfaces.
selftest -cryptoaccel
Verify the correct functioning of the accelerator cards.
selftest -burnin [-hours[=<Integer>]] [-minutes[=<Integer>]]
[-memory] [-media] [-ping] [-throughput] [-traffic]
[-cryptoaccel]
Run burn-in tests for a set of sub tests. If no sub tests are specified the following are included:
-memory, -ping, -traffic, -cryptoaccel.
selftest -abort
Abort a running self test.
selftest
Show the status of a running test.
Options
-abort Abort a running self test.
-burnin Run burn-in tests for a selected set of sub tests.
-cryptoaccel Verify the correct functioning of available crypto
accelerator cards.
-hours[=<Integer>] Test duration in hours. (Default: 48)
-interfaces=<Interface> Ethernet interface(s).
-mac Check if there are MAC address collisions on the
interfaces.
Chapter 2: Command Reference
72