Amer Networks E5 CLI - Manual (Page 63)

-verbose Increase amount of information to display.
<interface> OSPF enabled interface.
<interface> OSPF enabled interface.
<lsaID> LSA ID.
<OSPF Area> OSPF Area.
<OSPF Neighbor> Neighbor.
{HA | ALT} Show HA routingtable.
2.2.56. pcapdump
Packet capturing.
Description
Packet capture engine
Usage
pcapdump
Show capture status.
pcapdump -start [<interface(s)>] [-size=<value>] [-snaplen=<value>]
[-count=<value>] [-out] [-out-nocap]
[-eth=<Ethernet Address>] [-ethsrc=<Ethernet Address>]
[-ethdest=<Ethernet Address>] [-ip=<IP4 Address>]
[-ipsrc=<IP4 Address>] [-ipdest=<IP4 Address>]
[-port=<0...65535>] [-srcport=<0...65535>]
[-destport=<0...65535>] [-proto=<0...255>] [-icmp] [-tcp]
[-udp] [-promisc] [-ipversion=<1...15>]
Start capture.
pcapdump -stop [<interface(s)>]
Stop capture.
pcapdump -status
Show capture status.
pcapdump -show [<interface(s)>]
Show a captured packets brief.
pcapdump -write [<interface(s)>] [-filename=<String>]
Write the captured packets to disk.
pcapdump -wipe
Remove all captured packets from memory.
Chapter 2: Command Reference
63