Eneo EDMC-3221B - Manual (Page 39)

34
MOTOR SETUP
Motor Setup menu provides the pan and tilt speed of a camera. User can set the desired
speed with pushing the Joystick to the left or right. During operation, pressing 153 + ON
keys will change the speed to the SLOW mode and pressing 153 + OFF keys will change
the speed to the Normal mode.
Press and hold the CTRL key and moving the Joystick will operate with the TURBO speed
mode.
MOTOR SETUP
PROPOTIONAL P/T : ON
P/T MODE : NORMAL
SAVE AND EXIT(ESC TO CANCEL)
PROPOTIONAL P/T : ON / OFF
P/T MODE : SLOW / NORMAL / TURBO
SLOW MAXIMUM SPEED : 40
°/second
NORMAL MAXIMUM SPEED : 90
°/second
TURBO MAXIMUM SPEED : 380
°/second
PASSWORD EDIT
PASSWORD EDIT SETUP
(CTRL KEY)
INPUT PASSWORD
PASSWORD :
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
SAVE AND EXIT(ESC TO CANCEL)
You can change the password with 6-digit character in this menu.
The default password is 555555.
When the password enable is on, the input password window displays to enter the menu.
At this time, move the cursor to the desired character with the Joystick and press the CTRL
or IRIS Open key.
ORIGIN CHECK
If you find the dome in the wrong position during operation, execute this origin check and the
dome camera will return to the right position after the origin check operation.
ORIGIN CHECK
ARE YOU SURE ?
CANCEL
OK
Pressing 151 + ON keys will execute the origin check.