H3C Technologies H3C S12500X-AF Series Switches - Manual (Page 40)

36
Figure 35 Removing a filler panel (S12516X-AF switch)
Figure 36 Installing a power module (S12516X-AF switch)
Connecting the power cord
CAUTION:
•
Power on the switch after you have installed two fan trays on the switch.
• Make sure each power cord has a separate circuit breaker.
• Turn off the circuit breaker before you connect the power cord.
To connect the power cord:
1. Plug the AC power cord connector into the AC input receptacle of the power module.
2. Use a removable cable tie or self-adhesive cable tie (provided with the switch) to secure the
power cord to the handle of the power module.
3. Plug the other end of the power cord into an AC power receptacle, and turn on the circuit
breaker.