H3C Technologies H3C S12500X-AF Series Switches User Manual
Page 49
45
............................................................................
....................................Done.
Loading file flash:/S12500X-AF-CMW710-DEVKIT-R1110.bin....Done.
Loading file flash:/S12500X-AF-CMW710-MANUFACTURE-R1110.bin...Done.
Loading file flash:/S12500X-AF-CMW710-BOOT-R1110.bin........................
............................................................................
.......................Done.
Image file flash:/S12500X-AF-CMW710-BOOT-R1110.bin is self-decompressing....
............................................................................
.....Done.
System image is starting...
Line aux0 is available.
Press ENTER to get started.
Press Enter at the prompt. When the prompt
<Sysname>
appears, you can configure the switch.
After the switch finishes startup, verify the following items:
•
The cooling system is working, and you can hear fan rotating noise and feel air being blown out.
•
The LEDs on the MPUs show that the system is operating correctly. For more information about LEDs,
see H3C S12500X-AF Switch Series Installation Guide.