Configuration procedure, Figure 63, Vlan 10 is a su – H3C Technologies H3C S12500 Series Switches User Manual
Page 165
151
Figure 63 Application environment of local ND proxy
Because Host A's IPv6 address is on the same subnet as Host B's, Host A directly sends an NS
message to obtain Host B's MAC address. However, Host B cannot receive the NS message
because they belong to different VLANs.
To solve this problem, enable local ND proxy on GigabitEthernet 3/0/2 of Switch A so that Switch
A can forward messages between Host A and Host B.
Local ND proxy implements Layer 3 communication for two hosts in the following cases:
{
The two hosts must connect to different isolated Layer 2 ports of a VLAN.
{
If a super VLAN is used, the two hosts must belong to different sub VLANs.
Configuration procedure
You can enable common ND proxy and local ND proxy in VLAN interface view, Layer 3 Ethernet
interface view, or Layer 3 Ethernet subinterface view.
To enable common ND proxy:
Step Command
Remarks
1.
Enter system view.
system-view N/A
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Enable common ND proxy.
proxy-nd enable Disabled
by
default.
To enable local ND proxy:
Step Command
Remarks
1.
Enter system view.
system-view N/A
2.
Enter interface view.
interface interface-type
interface-number
N/A
3.
Enable local ND proxy.
local-proxy-nd enable Disabled
by
default.