Configuring gateways for the client – H3C Technologies H3C S12500 Series Switches User Manual
Page 56
42
Step Command
Remarks
3.
Specify the BIMS server IP
address, port number, and
shared key.
bims-server ip ip-address [ port
port-number ] sharekey [ cipher |
simple ] key
Not specified by default.
Configuring gateways for the client
You can specify up to eight gateways in a DHCP address pool.
To configure the gateways in the DHCP address pool:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter DHCP address pool
view.
dhcp server ip-pool pool-name
[ extended ]
N/A
3.
Specify gateways.
gateway-list ip-address&<1-8>
By default, no gateway is
specified.
Configuring Option 184 parameters for the client with voice
service
To assign voice calling parameters along with an IP address to DHCP clients with voice service, you need
to configure Option 184 on the DHCP server. For more information about Option 184, see "
To configure option 184 parameters in the DHCP address pool:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter DHCP address pool view.
dhcp server ip-pool pool-name
[ extended ]
N/A
3.
Specify the IP address of the
primary network calling
processor.
voice-config ncp-ip ip-address
Not specified by default.
4.
Specify the IP address of the
backup network calling
processor.
voice-config as-ip ip-address
Optional.
Not specified by default.
5.
Configure the voice VLAN.
voice-config voice-vlan vlan-id
{ disable | enable }
Optional.
Not configured by default.
6.
Specify the failover IP address
and dialer string.
voice-config fail-over
ip-address dialer-string
Optional.
By default, no failover IP address
or dialer string is specified.