Bed in, Table 188 – H3C Technologies H3C SecCenter UTM Manager User Manual
Page 220
212
Figure 208 Add a user-defined service
Table 188 User-defined service configuration items
Item Description
Name
Required
Type a name for the user-defined service.
The name cannot contain any of these characters: ^'<>&:;"/\
Description
Optional
Type some descriptive information for the user-defined service.
Protocol
Required
Configure the protocol information for the user-define service.
Select TCP, UDP, ICMP or Others.
•
If you select TCP, specify the source port and the destination port, in the
range 0 to 65535.
•
If you select UDP, specify the source port and the destination port, in the
range 0 to 65535.
•
If you select ICMP, specify the protocol type and the code, in the range 0 to
255.
•
If you select Others, type the protocol number, in the range 0 to 255 except
1, 6, and 17.
To delete user-defined services, select them and click Delete on the user-defined service management