H3C Technologies H3C SecCenter UTM Manager - Manual (Page 231)

223
Option Description
Policy Query interzone rules by policy.
Status Query interzone rules by status (enabled, disabled, or both)
Referenced Query interzone rules by reference status (referenced, not referenced, or both)
Table 202 Fields of the interzone rule list
Filed Description
Src Zone Source zone of the interzone rule
Dest Zone Destination zone of the interzone rule
ID
ID of the interzone rule
When you create an interzone rule, the system automatically assigns an ID to the
rule according to the number of existing rules for the source zone and destination
zone pair, starting from 0. For example, the first rule created for the source zone
Trust and the destination zone DMZ is numbered 0, the second rule created for
the same source zone and destination zone pair is numbered 1.
Src IP Source IP address of the interzone rule
Dest IP Destination IP address of the interzone rule
Service All services of the interzone rule
Time Range Time range during which the interzone rule takes effect
Action Filtering action of the interzone rule
Description Descriptive information about the interzone rule
Status Whether the interzone rule is enabled or disabled
Logging Whether logging is enabled for the interzone rule
Referenced Whether the interzone rule is referenced or not
Policy
Policies that the interzone rule is in.
You can click a policy name to enter the page for managing the policy's rules.
See “ Rule management .”
Operation
• Click the icon to modify the interzone rule.
• Click the icon to copy the interzone rule.
Return to Interzone rule management functions .
Adding an interzone rule
From the navigation tree of the firewall management component, select Interzone rules under Security
Policy Management. Click Add to enter the Adding an interzone rule page and configure the rule as
shown in
Figure 220 . Table 203 describes the configuration items.