H3C Technologies H3C SecCenter UTM Manager - Manual (Page 229)

221
Figure 218 Add an IP address group
Table 199 IP address group configuration items
Item Description
Name
Required
Type a name for the IP address group.
The name can contain only digits (0-9), letters (a-z), and underscores (_), and
it cannot start or end with an underscore.
IMPORTANT:
The name must be unique in the system. It cannot be the same as the name of an
existing host address, address range, subnet address, or IP address group.
Description
Optional
Type some descriptive information for the IP address group.
Member
Required
Add members to the IP address group.
• Available members are listed in the left box, including all added IP
addresses. The right box lists the members to be added to the IP address
group.
• You can select one or more members in the left box and then click Add>> to
add them to the right box. You can also select one or more members in the
right box and click <<Remove to remove them from the right box to the left
box.
To delete IP address groups, select them and click Delete on the IP address group management page.
Return to
IP address management functions .