Grass Valley CopperHead PowerWafer - Manual (Page 12)

8
System Overview
Powered Systems using the PowerWafer
PowerWafer, Direct to Base Station
When connected directly to an AC-powered Base Station using SMPTE hybrid fiber cable,
the system delivers up to 95 watts of power to the camera and accessories. Such a system is
typically configured as shown in
Figure 2-3 , and includes the following components:
Fig. 2-3: Direct Connect to Base Station with Power Wafer
• A: Camera Unit
• B: AC-powered Base Station with
internal camera power supply
• C: PowerWafer
• D: CHCR camera remote cable
• E: CHBR base remote cable
• F: Hybrid fiber optic cable