Grass Valley CopperHead PowerWafer User Manual
Page 25
21
CopperHead PowerWafer
User Guide
See Error! Reference source not found.to specify the correct cable for your Camera
Remote Control Panel
• 6: Base Station Intercom Connector
Connect your house intercom system here:
• XLR3: Two-wire (Clear-Com or RTS)
• XLR5M: Four-wire (matrix-style)
Two 4 amp fuses (5 x 20mm).fuses are in operation at all times – both the AC Line Hot
and the AC Line Neutral are fused.
For more information, see
• 7: SD/SDI or HD/SDI Output
Digital video from camera's SDI output
• 8: VBS Return Input
Analog composite video signal sent to Camera Unit.
• 9: VBS Return Input Switch
Switches the VBS Return Input connector to be optimized for one of two uses:
• A: Sync In: Genlock/Sync/Tri-Level sync signal.
• B: Composite Video In: Typically used to send analog VBS return video to the
camera or an external monitor.