Grass Valley CopperHead PowerWafer - Manual (Page 13)

9
CopperHead PowerWafer
User Guide
Power Wafer, Remote Panel-Mounted Fiber Connector
The hybrid fiber receptacle may be mounted a distance from the Base Station if the station
is equipped with a pair of inexpensive ST fiber connectors and a Molex receptacle to carry
power, as shown in
Figure 2-4 . A breakout cable can be used to connect the hybrid fiber
receptacle to Base Station, or infrastructure wiring can be used.
Fig. 2-4: Powered Base Station with Fiber Receptacle Extension
• A: Camera Unit
• B: Power Wafer
• C: CHCR camera remote cable
• D:
AC-powered Base Station with internal
camera power supply
• E: CHBR base remote cable
• F:
ST & Molex breakout cable or
campus/building infrastructure
• G: Hybrid fiber optic cable