Grass Valley EDIUS v.5.1 - Manual (Page 467)

EDIUS — User Reference Guide 467
Multi Cam Mode
Setting Camera Switch Point
A camera switch point is a trigger which causes a switch in the multi cam
camera display.
To set a camera switch point, do the following:
1. Position the Timeline cursor at the point at which you wish to set a
switch point.
2. Right-click the time scale and select “Add Cut Point/Clear Cut Point
(Toggle)” from the menu as shown in
Figure 530 .
Figure 530. Time Scale Menu - Add Cut Point/Clear Cut Point
A camera switch point is set at the cursor location and a cut point is added
to the clips on the switch point as illustrated in
Figure 531