Grass Valley EDIUS v.5.1 User Manual
Page 474
474
EDIUS — User Reference Guide
Section 5 — Timeline Operations
The clip from the selected camera is activated and the clips from the other
cameras are disabled as illustrated in
. In this example, the
camera is switched from Camera 3 to Camera 1 at the first switch point.
Figure 537. Switch from Camera Three to Camera 1
Alternative Method:
•
With playback stopped, move the Timeline cursor to the clip to which
you wish to switch at a particular switch point and press the number [
1
]
to [
8
] on the numeric keypad of the camera to which you wish to switch.
Related Operations:
•
To set a camera switch point and switch the camera simultaneously, do
one of the following:
•
Move the Timeline cursor to the point at which you wish to set a
switch point and switch to the selected camera and press the camera
number key [
1
] to [
8
] on the numeric keypad while holding down
the [
CTRL
] key.
•
Move the Timeline cursor to the point at which you wish to set a
switch point and switch to the selected camera and double-click the
desired track camera in the multi cam display.