Grass Valley K2 Edge Protocol Manual v1.0 - Manual (Page 20)

K2 Edge Protocol Manual – document version 1.0 – Page 20
4.14. Sub command sp-print
Function: prints the values of all scene parameters to the standard out.
field name field type value
cmd mandatory nre
subcmd mandatory sp-print
exid mandatory External ID. See above.
stm optional Start time for the command in hh:mm:ss:ff timecode format.
When not specified, the command starts as soon as possible.
role optional Role field. See above.
Example:
{cmd=nre; subcmd=sp-print; exid=6; stm=14:00:10:00;}
4.15. Sub command control
Function: allows for various levels of control over NRE.
field name
field type Value
cmd mandatory nre
subcmd mandatory control
exid mandatory External ID. See above.
nosignal-sw optional true to enable the visibility of no-signal content, i.e. the content
that is shown when the original content failed to load.
stats-sw optional true to display playback statistics.
perfstats-sw optional true to display playback performance statistics. Requires stats-sw
to be set to true as well.
stm optional Start time for the command in hh:mm:ss:ff timecode format.
When not specified, the command starts as soon as possible.
role optional Role field. See above.
Example:
{cmd=nre; subcmd=control; nosignal-sw=true; stats-sw=true;
exid=7; stm=14:00:10:00;}