Grass Valley K2 Edge Protocol Manual v1.0 - Manual (Page 25)

K2 Edge Protocol Manual – document version 1.0 – Page 25
5.9. Sub command preload-play
The preload-play command combines the individual preload and play commands described
below. Its feedback is almost an exact combination of the feedback produced by these individual
commands.
5.9.1. Life cycle diagram
The diagram below shows the life cycle of the
preload-play command.
The start point can be scheduled with the stm (start time) field, and if not defined the preload phase
starts ASAP.
The play point can be scheduled with the stm-play field, and if not defined the playback phase starts as
soon as the preload phase has completed.