Grass Valley K2 Edge Protocol Manual v1.0 - Manual (Page 34)

K2 Edge Protocol Manual – document version 1.0 – Page 34
Notes:
1) The command is considered valid at the reception point and the command started successfully.
No feedback is provided on any of the following events, including possible errors. The template
will run until it reaches the stop point, possibly with limited functionality due to errors encountered
during playback.
2) The command is considered invalid at the reception point. The command is not executed.
3) The command is considered valid at the reception point but failed to start. The command is not
executed.
5.11.3. Feedback level 'most'
Coverage from the reception point up to and including the safe point. The only event not covered in the
feedback is reaching the stop point, which theoretically can be hours away from the safe point.
path note field reception play error safe stop
success (4) fb-event
fb-stat
ack
ok
play
ok
safe
ok
failure (2) fb-event
fb-stat
nak
error
failure (3) fb-event
fb-stat
ack
ok
play
error
failure (5) fb-event
fb-stat
fb-info
ack
ok
play
ok
error
error
asset
safe
error
Notes:
4) The command is considered valid at the reception point. The play command started and reached
the safe point without errors. The template will continue running until the stop point, but this event
is not reported in the feedback.
5) The command is considered valid at the reception point. The play command started successfully
but errors were encountered before reaching the safe point. The template will continue playing
until the stop point is reached, but this event is not reported in the feedback.