Grass Valley K2 Edge Protocol Manual v1.0 - Manual (Page 27)

K2 Edge Protocol Manual – document version 1.0 – Page 27
Note the presence and value of fb-term-sw in the last message, indicating feedback ends for this
command. Also note that the fb-info field was not added to the feedback, since there was nothing to
mention.
5.9.3. Feedback level 'most'
Coverage from the reception point up to and including the safe point, spanning all of the preload phase
and most of the playback phase. The only event not covered in the feedback is reaching the stop point,
which theoretically can be hours away from the safe point.
path note field reception start error ready play error safe stop
success (4) fb-event
fb-stat
ack
ok
start
ok
ready
ok
play
ok
safe
ok
failure (2) fb-event
fb-stat
nak
error
failure (3) fb-event
fb-stat
ack
ok
start
error
failure (5) fb-event
fb-stat
fb-info
ack
ok
start
ok
error
error
asset
ready
error
play
error
safe
error
failure (6) fb-event
fb-stat
fb-info
ack
ok
start
ok
ready
ok
play
ok
error
error
asset
safe
error
Notes:
4) The command is considered valid at the reception point. The preload phase completed
successfully. The playback phase started and reached the safe point without errors. The template
will continue running until the stop point, but this event is not reported in the feedback.
5) The command is considered valid at the reception point. The preload phase started successfully
but preload errors were encountered before the ready point was reached. The template is played
though (with limited functionality). The last event reported in the feedback is reaching the safe
point. The template will continue to play until it reaches the stop point.
6) The command is considered valid at the reception point. The preload phase completed
successfully. The playback phase started successfully but errors were encountered before
reaching the safe point. The template will continue playing until the stop point is reached, but this
event is not reported in the feedback.