Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 112)

100 Rev 1.3 • 14 Dec 09
10. Managing Inputs and Outputs
Updating Input/Output Switching
6 In the ‘Physical Mono Take’ section, enter the ‘Input’ and the ‘Output’ you want to switch.
For example, if currently input 1 switches to output 3, and you want input 1 to switch to output
6, enter 6 in the ‘Output’ field.
7 From the drop-down lists, select a ‘Channel’ 1 or a ‘Channel’ 2 for the input and the output.
8 Click
Execute
. A ‘take’ is performed and the new switching configuration set.
9 (Optionally) create a switching configuration “salvo.” For more information, see Working With
Salvos on page 145.
10 Repeat steps 2–8 for each control card being updated.