Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 166)

154 Rev 1.3 • 14 Dec 09
18. Managing Protocols
Viewing Protocols and Applications
4 Click
Read All
. Currently loaded protocols display in the ‘Software Versions’ section, as shown
in Figure 18-1.
How to View the Software List Using the ‘Expanded’ Setting
1 Launch UniConfig. (See Launching UniConfig on page 9.)
2 Select a control card. (See Selecting a Control Card on page 10.)
3 From the menu bar, select ‘Windows > Configuration’. The ‘Configuration’ window appears,
as shown in Figure 18-1.
4 Click Read All . Current configuration settings for the selected control card populate the ‘Config-
uration’ window fields.
5 From the menu bar, select ‘Tools > Options’. The ‘Configuration Options’ dialog box appears:
Figure 18-2. Configuration Options Dialog Box
6 Check the ‘View expanded software descriptions’ check box. By default this box is not
checked.
7 Click
OK
to save changes and close the dialog box.
Or
Click
Cancel
to close the dialog box without saving changes.