Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 171)

UniConfig Configuration Application • User’s Guide 159
19. Viewing System Status
The status of the system’s power supply, references, and fans can be viewed using UniConfig. This
section describes how to view the system status.
View the System Status
The UniConfig ‘System Status’ window displays the status of the system power supply, references,
and fans. In order to view this status, you must use an Ethernet connection between the control card
and UniConfig.
How to View System Status
1 Launch UniConfig. (See Launching UniConfig on page 9.)
2 From the menu bar, select ‘Window > System Status’. The ‘System Status’ window appears:
Figure 19-1. System Status Window
3 Click
Read
to view the current system status. The ‘This Control Card Status’ section displays
the “health” of the reference connections and control cards. ‘Power Supplies’ and ‘Fans’ status
information display in the fields provided.