Grass Valley UniConfi NVISION Series v.1.3 - Manual (Page 158)

146 Rev 1.3 • 14 Dec 09
17. Working With Salvos
Creating a Salvo
3 From the menu bar, select ‘Tools > Options’. The ‘Connections Options’ dialog box appears:
Figure 17-2. Connections Options Dialog Box
Select to have all switching data sent to the salvo whenever Write is clicked and to have the
‘Salvo’ field display on the ‘Connections’ window:
a Select the ‘Salvo’ tab.
b Check the ‘Send all reads to Salvo Window’ check box.
c Check the ‘Show Salvo Window’ check box.
d Click OK to save your changes and close the dialog box.
4 From the menu bar, select ‘Window > Connections’. The ‘Connections’ window appears with
the ‘Salvo’ section displaying:
Figure 17-3. Connections Window with Salvo Section