Grass Valley CR6400 Family v.1.2 User Manual
Page 49

39
CR6400
User’s Guide
4 If you have enabled NV9000 mode, enter a panel ID in the ‘NV9000 Panel ID’ field.
The panel ID must be a number unique within the NV9000 configuration. It must contain no
special characters, spaces, or punctuation marks.
By default, the panel ID is composed of the last two octets of the module’s current IP
address. For example, if its IP address is 192.168.97.21, then the default panel ID is 97021.
5 If you have enabled NV9000 mode, check the ‘Use DHCP to acquire IP Address’ check box if
you want the NV9000 system to use DHCP to determine the remote panel module’s IP
address. Otherwise, the panel’s IP address will be fixed in the NV9000 system and will retain
its present IP address.
Using DHCP is strongly recommended.
6 Click Update Remote Panel to complete the conversion.