HEIDENHAIN SW 54843x-03 - Manual (Page 355)

HEIDENHAIN MANUALplus 620 355
4.9 Dr
illing and milling pat
ter
ns
Milling pattern linear, axial
Select milling
Press the Pattern linear soft key
Select slot, axial
Select ICP contour, axial
Press Pattern linear to machine milling patterns in which the
individual features are arranged at a regular spacing in a straight line
on the face.
The parameters of the milling operation are also requested.
Use the following parameter combinations to define the:
 Starting point of pattern:
 X1, C1 or
 XK, YK
 Pattern positions:
 Ii, Ji and Q
 I, J and Q
LINEAR MILLING PATTERN, AXIAL
Cycle parameters
X, Z
Starting point
C Spindle angle (C-axis position)—(default: current spindle
angle)
Q Number of slots
X1, C1 Starting point of pattern in polar coordinates
XK, YK Starting point of pattern in Cartesian coordinates
I, J End point of pattern in Cartesian coordinates
Ii, Ji: Pattern spacing (incremental)