HEIDENHAIN SW 54843x-03 - Manual (Page 396)

396 ICP programming
5.5 Editing ICP cont
ours
Editing contour elements
The MANUALplus provides various ways to change an existing
contour. The procedure is illustrated in the following example of
editing the length of an element. The other functions work similar to
the procedure described here.
The Manipulate menu provides the following functions for editing
existing contour elements:
 Trimming
 Length of element
 Length of contour (only for closed contours)
 Radius
 Diameter
 Change
 Contour element
 Form element
 Delete
 Element/Range
 Move element/range as well
 Contour/Pocket/Figure/Pattern
 Form element
 All form elements
 Transform
 Shifting a contour
 Contour rotation
 Contour mirroring: You can define the position of the mirror axis
by entering the starting point and end point or the starting point
and angle