HEIDENHAIN SW 688945-03 - Manual (Page 128)

128 Teach-in mode
4.3 Single cut cy
cles
4.3 Single cut cycles
Single cuts Symbol
Rapid traverse positioning
Move to the tool change position
Linear machining, longitudinal/
transverse
Single longitudinal/transverse cut
Linear machining at angle
Single oblique cut
Circular machining
Single circular cut (for cutting
direction, see menu key)
Machine a chamfer
Machine a rounding
Call an M function
In the single-cut cycles you position the tool at rapid
traverse, perform linear or circular cuts, machine
chamfers or rounding arcs, and enter M functions.