Disassembling version 2 – SMA SUNNY CENTRAL Maintenance manual User Manual
Page 18
![background image](/files/818964/content/doc018.png)
Maintaining the Sunny Central
SMA Solar Technology AG
18
SCWAR-WEN094020
Maintenance Manual
Disassembling version 2
1. Remove the Start / Stop switch.
2. Loosen the screws at the front filter in the roof of the
Sunny Central.
3. Loosen the screws at the back filter of the Sunny
Central.
4. Pull the front filter forward and remove it.
5. Pull the rear filter forward and remove it. Put the filters
aside.
6. Remove the screws (A) which hold the roof at the
Sunny Central. The screws are in the place where the
front filter was attached before.
☑ The roof can now be tilted backwards (1) to clean
the filter in the roof of the switch cabinet.
➤ If there is not enough space to tilt the roof backwards,
remove it. To do so, loosen the cable gland (2) of the
switch.
7. Unhook the roof and remove it by pulling it upwards.
☑ The roof is removed.
SUNNY CENTRAL
100