Yaskawa 1000 Series Drive Option - Manual (Page 18)

5 Installation and Uninstallation Procedure
18 YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual
3.
Firmly plug the end of the connection cable into the CN19 connection port on the
unit.
NOTICE: Make sure the connector is facing in the proper direction when plugging it into the unit. An
improper connection can damage the connector and the unit.
Figure 8
Figure 8 Plug the Connection Cable into the Unit
4.
Align the connector tabs on the option with the insertion tabs on the unit as shown in
Figure 9 .
Figure 9
Figure 9 Align the Option and the Unit
Note: Take proper precautions when connecting the option so the option will easily fit onto the unit.
Make sure the connector cable is not pinched between the option and the unit.
Connector tab should face outward
Insertion tabs Connector tabs