3 receiving, Option package contents, Tools required for installation – Yaskawa 1000 Series Drive Option User Manual
Page 9: 3receiving
YASKAWA ELECTRIC TOBP C730600 55D 1000-Series Option PS-A10 Installation Manual
9
3 Receiving
3
Receiving
Please perform the following tasks upon receiving the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the option
nameplate. (Refer to
on page
for more information)
• Contact your supplier if you have received the wrong model or the option does not
function properly.
◆
Option Package Contents
◆
Tools Required for Installation
• A Phillips screwdriver (M4 metric / #1, #2 U.S. standard size) is required to install the
option.
• A straight-edge screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is required to install
the unit and wire the option terminal block.
Note: Tools required to prepare option cables for wiring are not listed in this manual.
Description:
Option
<1> The warning label packaged with the option must be affixed to the option to maintain UL listing.
for instructions on label placement.
<2> Only the Z1000 drive requires a tapping screw for installation. For options designed for use with the Z1000 drives,
all packages include tapping screws. Packages including options for other units, however, might or might not
include tapping screws.
Warning Label
Screws
(M4)
Tapping
Screw
(M4)
Installation Manual
–
Quantity:
1
1
3
1
1
危 険
据え付け、運転の前には必ず
取扱説明書を読むこと。
通電中および電源遮断後5分以内は
本体内部，コネクタに触れないこと。
けが．感電のおそれがあります。
WARNING
Read manual before installing.
Wait 5 minutes for capacitor
discharge after disconnecting
power supply.
Risk of electric shock.
MANUAL