Yaskawa J7 Drive - Manual (Page 81)

6-8
Constant
No.
Name Description
U-01
Frequency reference
Hz
Frequency reference can be monitored.
(FREF) (Same as FREF)
U-02
Output frequency
Hz
Output frequency can be monitored.
(FOUT) (Same as FOUT)
U-03
Output current
Hz
Output current can be monitored.
(IOUT) (Same as IOUT)
U-04 Output voltage V Output voltage can be monitored.
U-05 DC voltage V Main circuit DC voltage can be monitored.
U-06 Input terminal status — Input terminal status can be monitored.
(see paragraph 4.4)
U-07 Output terminal status — Output terminal status can be monitored.
(see paragraph 4.4)
U-09
Fault history
—
Last four fault history is displayed.
(last 4 faults) (see paragraph 4.4)
U-10 Software No. — Software No. can be checked.
U-15 Data reception error — See Table below
• Monitoring
Following items can be monitored by U-constants
U-15
Description
Data
0 CRC Error
1 Data Length Error
2 Not Used
3 Parity Error
4 Overrun Error
5 Framing Error
6 Time out Error