Installation procedures, Program review, Selecting an installation site – Irritrol IBOC-Plus User Manual

Page 18

Advertising
background image

16

PROGRAM REVIEW

This controller feature enables the various operational settings and status

conditions of each program to be easily reviewed. Within the review

sequence, the following program settings are displayed: Master Valve

On/Off, Rain Sensor On/Off, Watering Days, Start Time(s) and Water

Budget percent factor.
Note: Program changes cannot be made while in the review mode.
To review a program, use the following procedure:
1. Turn the function dial to the

PROGRAM REVIEW

position.

2. Select the program to be reviewed by pressing the

PROGRAM

button

A

,

B

or

C

.

3. Press the

NEXT

button to step through the various review displays.

Press and hold the button to automatically advance through the

displays, briefly pausing at each program element.

4. Repeat steps 2 and 3 to review remaining programs.
5. When finished, return the function dial to

AUTO RUN

.

This section includes instructions for mounting the controller cabinet

and making the necessary wiring connections. To ensure safe

operation, it is important to follow the instructions carefully.

SELECTING AN INSTALLATION SITE

Selecting the proper installation site for the controller is essential to

safe and reliable operation. The IBOC Plus features a weather-resistant

cabinet enabling outdoor installation.
The controller should be installed on a vertical wall or other sturdy

structure with the display at approximately eye level. An optional

pedestal mount, model # P2B is available for stand-alone installation.

It is important to select a location that shades the controller during

the hottest hours of the day and provides as much protection from

rain, wind and snow as possible. Never install the controller where it

will be exposed to direct spray from the sprinklers.
Note: When mounting the IBOC Plus controller with a SPC-2 Solar

Power Convertor, it is important to select a location that provides

maximum protection from rain, snow and direct irrigation spray while

providing the SPC-2 exposure to sunlight for a minimum of two hours

per day.

Installation procedures

INSTALLATION PROCEDURES

Advertising