Irritrol MC-E - Manual (Page 14)

1
Enter/Modify/Delete - Single or Multiple Stations
Step 1 – Place the Function Dial to the SET PROGRAM position.
Step 2 – Enter the program number (1–8) being modified. Press to activate the selection.
Press the button to clear any “Key Entry Error”.
Step 3 – Enter the station number you want to create, modify or delete from the program and press the button.
Select multiple stations by entering the first station number (two digits), then enter the last station in the
sequence (two digits) and press the
button.
Entering a station number that is not assigned to the program will return a “No Runtime” message.
Step 4 – Assign the station runtime and press the button. If the station has a previous runtime, the newly entered
runtime will overwrite the previous value. Enter a runtime value of 0 minutes to delete.
Step 5 – Repeat Steps 3–4 to enter/modify/delete additional station(s) from the program.
Step 6 – Return the Function dial to AUTO/RUN position to exit SET PROGRAM.
Review Program Runtimes
Step 1 – Place the Function Dial to the SET PROGRAM position.
Step 2 – Enter the program number (1–8) being modified. Press to activate the selection.
Press the button to clear any “Key Entry Error”.
Step 3 – Press the button once to review the program’s cumulative runtime.
Press the button twice to review individual station’s runtime in the program. The controller will
sequentially scroll through the program’s active stations along with their corresponding runtime.
Step 4 – Return the Function dial to AUTO/RUN position.