Irritrol MC-E - Manual (Page 8)


Power On / Reset Mode
MC-E will initiate the operating system and reload all saved data in the memory for stable operation every time the
controller is powered up. Place the Function Dial in the Auto/Run position for normal operation.
Initial Display Auto Run Mode Display
System SETUP
The SETUP function allows you to modify the following MC-E parameters:
• Current Date • Current Time
• Security Password • Event Days
• Enable/Disable Master Valve
SETUP – Current Date
Set Current Date
Step 1 – Place the Function dial to the SETUP position.
Step 2 – Set the date mode if necessary. To set the date to International format (Day/Month/Year), press .
To return to the default U.S. format, press .
Press the button to clear any “Key Entry Error”.
Step 3 – Press the or the button to access the date setup screen.
Step 4 – Enter the Month, Date and Year in MM DD YY format. If the MC-E is operating in International format, enter
the Date first, the Month second and the year last (DD MM YY).
Example: For February 20, 2006, press the 022006 buttons.
Step 5 – Press the button to accept the changes. The display will now reflect the new date.
While in SET DATE mode, you can advance to the SET TIME mode by pressing
the NEXT button.
Step 6 – Return the Function dial to AUTO/RUN position to exit SETUP.
U.S. format
International format
U.S. format
International format