Irritrol MC-E User Manual
Page 19
1
Modify a Looping Start Time
Step 1 – Place the Function Dial to the SET PROGRAM position.
Step 2 – Enter the program number (1–8) being modified. Press the
to activate the selection.
Press the
button to clear any “Key Entry Error”.
Step 3 – Press
to enter a new loop start time in H MM format (Hours, Minutes and
for PM)
and press
to accept.
Step 4 – Press
to enter a new loop end time in H MM format (Hours, Minutes and
for PM)
and press
to accept.
Step 5 – Press
to enter a new loop delay time in H MM format (Hours, Minutes) and press
to accept.
Step 6 – Return the Function dial to AUTO/RUN
position to exit SET PROGRAM.
Delete a Looping Start Time
Step 1 – Place the Function Dial to the SET PROGRAM position.
Step 2 – Enter the program number (1–8) being modified. Press the
to activate the selection.
Press the
button to clear any “Key Entry Error”.
Step 3 – Enter
and press
to clear the looping start time. (The start time and end time are
automatically deleted.)
Step 4 – You must re-enter a start time to reactivate the program. (See Set Program – Program Start Time section.)
Step 5 – Return the Function dial to AUTO/RUN
position to exit SET PROGRAM.