Irritrol MC-E - Manual (Page 16)

1
Delete Program Start Time
Step 1 – Place the Function Dial to the SET PROGRAM position.
Step 2 – Enter the program number (1–8) being modified. Press the to activate the selection.
Press the button to clear any “Key Entry Error”.
Step 3 – Press the button to review all start times. Each programmed start times will be displayed momentarily
until the last start time is shown.
Step 4 – Enter the start time number (1–8) being deleted and press the button. Assign a start time of 0 and
press to finalize.
After deleting a Start, MC-E will renumber remaining the start times to fill the empty start time slot.
i.e., After deleting start time 1, start time 2 will fill in start time 1 slot and so on.
Step 5 – Return the Function dial to AUTO/RUN position to exit SET PROGRAM.
Step 6 – Repeat Steps 1–5 to delete additional start times.