Setting the ip address, Setting the subnet mask address, Setting the gateway address – iSys Iterra Mi875 User Manual
Page 29
December 2011: Revision 001
29
8.
Press the up or down arrow to change the LCD contrast setting
9.
Press Save
10. Down arrow to Exit to Offline
11. Press Offline to bring the printer online
Setting the IP Address
1.
Turn the printer Offline
2.
Select Menu
3.
Select until you reach Page 3
4.
Arrow down to Network Settings
5.
Press Select
6.
Arrow down to IP Address
7.
Press Select
8.
When the arrow is flashing, use the up and down arrows to adjust the value
9.
When you have set the desired value, press Save
10. Press Select again and change the next value.
11. Continue until the desired IP address is set
12. Down arrow to Exit
13. Follow the procedure for Applying Network Settings
Setting the Subnet Mask Address
1.
Turn the printer Offline
2.
Select Menu
3.
Select until you reach Page 3
4.
Arrow down to Network Settings
5.
Press Select
6.
Arrow down to Subnet Mask
7.
Press Select
8.
When the arrow is flashing, use the up and down arrows to adjust the value
9.
When you have set the desired value, press Save
10. Press Select again and change the next value.
11. Continue until the desired IP address is set
12. Down arrow to Exit
13. Follow the procedure for Applying Network Settings
Setting the Gateway Address
1.
Turn the printer Offline
2.
Select Menu
3.
Select until you reach Page 3
4.
Arrow down to Network Settings
5.
Press Select
6.
Arrow down to Gateway
7.
Press Select