Casio DT-X10 - Manual (Page 32)

E-30
Warning Label
• This label is a warning label for Class 2 laser products that comply with
IEC60825-1:1993+A1:1997.
• Although Class 2 laser light is only emitted momentarily, never look directly into
the beam light.
• CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
• The laser light emitted by this laser scanner has a maximum output of less than
1 mW and a wavelength of 650 nm.
Bar Code Scanning Position
Position the laser scanner close to the bar code when scanning small bar codes.
Position the laser scanner at a distance from the bar code so that the bars enter the light
when scanning large bar codes.
Warning!
Never look directly into the laser light.
• This product scans using laser light. Never look directly into the laser light
or shine the laser light into the eyes.
Margin Margin
Good Good Good
Bad Bad Bad Bad
DT-X10_E_P14_36.p65 05.4.1, 11:04 AM 30