Casio DT-X10 - Manual (Page 60)

E-58
Loading a CF Card
1. Wipe the surfaces of the card so it is free of any dirt, dust, or oil.
2. Remove the screws that secure CF Extension Unit in place, and then remove the card slot cover.
3. Making sure that the top surface of the card is facing in the same direction as the
Handheld Terminal display, slide the card into the slot.
You will not be able to insert the card all the way into the slot if it is not oriented correctly.
4. Replace the CF card compartment cover, and secure it in place with its screws.
When removing a card, hook your finger on the rim of the card and pull.
CF Card Extension Unit (DT-894CFU) Specifications
Card Slot: Compact Flash Card Type I/Type II (3.3V)
Dimensions: Using Standard Card Cover: Approximately
70(W)
× 78(D) × 13(H) mm (2 3 ⁄
4
"W × 3 1 ⁄
8
"D × 1 ⁄
2
"H)
Using Large Card Cover: Approximately
85(W) × 78(D) × 13(H) mm (3 3 ⁄
8
"W × 3 1 ⁄
8
"D × 1 ⁄
2
"H)
Weight: Using Standard Card Cover: Approximately 40g (1.4oz)
Using Large Card Cover: Approximately 45g (1.6oz)
DT-X10_E_P53_59.p65 05.4.1, 11:04 AM 58