Casio DT-X10 - Manual (Page 43)

E-41
Configuring DIP Switch Settings
Dismounting the bottom cover of the Bridge Satellite Cradle exposes the DIP switches.
You can change the ON/OFF settings of the DIP switches to set the configuration.
Please, set after first switching OFF the power.
1 2 3 4 5 6 7 8
Not used (Always off)
Not used (Always off)
Host Computer Interface
Setting
RS-232C
USB 6
OFF
ON
Setting
Intermediate Unit
Daisy Chain Disabled/Termination 5
OFF
ON
Setting
Host Computer
Daisy Chain 3
OFF
ON
4
OFF
OFF
Daisy Chain
Connection Type
Setting
115,200bps
*Initial factory default setting
1
ON
2
OFF
Bridge Satellite Cradle Data Rate
*
*
*
*
Important!
Note that other DIP settings are used for testing and inspection purposes. Because
of this, you should never use any DIP settings other than those described above.
DT-X10_E_P37_52.p65 05.4.1, 11:04 AM 41